Networking help please thank you

Jesus · Post by **Jesus** » Fri Jan 13, 2006 10:04 am

help I am no pro with jury rigged network setups =\
I have 2 Netgear Switches plugged directly into a cable modem downstairs(two uplinks)
off of one of the Netgears I have a line running upstairs to a linksys 4 port router's uplink
the end goal is for me to not buy another hub / switch and be able to use the Linksys router as one.
Is this feasible?

=\

-Adam

Donnel · Post by **Donnel** » Fri Jan 13, 2006 11:55 am

So what's the trouble?

Switch to router needs a crossover cable if I recall, I don't deal with this type of setup much. (correct me if I'm wrong you guys).

Captain Insano · Post by **Captain Insano** » Fri Jan 13, 2006 12:45 pm

Jesus wrote:help I am no pro with jury rigged network setups =\
I have 2 Netgear Switches plugged directly into a cable modem downstairs(two uplinks)
off of one of the Netgears I have a line running upstairs to a linksys 4 port router's uplink
the end goal is for me to not buy another hub / switch and be able to use the Linksys router as one.
Is this feasible?

=\

-Adam

Ok first...

Unplug the switches from the cable modem. Plug in your linksys router's uplink to the cable modem.

Plug the two switches into the 4 port switch on the linksys. More than likely you will need to use crossover cables.

Reset the factory defaults on the linksys. Reset the cable modem and then again reset the linksys router.

You should be fix't.

Jesus · Post by **Jesus** » Fri Jan 13, 2006 1:42 pm

I need to have the Linksys where it currently is physically. The switches are 16 & 24 ports, they need to stay downstairs and thats where all the wall jacks are punched out at.

My boss is trying to make my life hell with this godawful network setup =\

-Adam

The Kizzy · Post by **The Kizzy** » Fri Jan 13, 2006 1:48 pm

God AND Jesus haveing computer issues...................hmmm

Captain Insano · Post by **Captain Insano** » Sat Jan 14, 2006 5:22 am

hmmm... interesting... Ok something is going to have to "play router". Period.

Tell your stupid jew boss to cough up 40 bucks for a router or put two fucking NICS in one computer and use internads connection sharing.

All those switches eventually need to be plugged into a router for addressing porpiouses.

Tikker · Post by **Tikker** » Sat Jan 14, 2006 11:44 am

ok, here's how it goes

Modem goes to router

If you have to run more cable to do it, then run more cable

Switches plug into the router (regular cat5 is fine)

ps, you only need crossover cables when you move between same layer device

ie, layer 2 to layer 2, or 3 to 3
when you go 3-2 or 2-3 straight thru is fine

set up should look like

Modem -> Router ->switch1/2

Jesus · Post by **Jesus** » Sat Jan 14, 2006 12:02 pm

CAN I USE THE FUCKING ROUTER AS ANOTHER HUB / SWITCH UPSTAIRS?

Captain Insano · Post by **Captain Insano** » Sat Jan 14, 2006 4:05 pm

YES U KAN. plug one of the standard ports from the 4 port switch portion of the router into another port on another switch. DON'T use the uplink!

Post by **Tossica** » Sat Jan 14, 2006 4:05 pm

I already gave you all this info days ago.

namelesstavern.net

Networking help please thank you

Networking help please thank you

Re: Networking help please thank you