LCD screen
Moderator: Dictators in Training
LCD screen
okay, so last weekend i bought a Gateway Profile 5 computer at a state surplus auction
yeah, it's fuckin' goofy lookin'
problem is, the 17" LCD screen is all wonky. after troubleshooting as much as possible (drivers & whatnot) i have decided that it is simply the screen itself. some areas of the display tend to repeat to the right of where they are supposed to be, which looks terrible. i did a livechat with a gateway CS person, and she wouldn't tell me anything beyond how to separate the panel from the base. i said "but the problem is in the screen itself, can you tell me how to replace that? or at least a part number so i can do it myself?" and she said replacing a screen is too complicated and i should not attempt to do this myself. she tried to get me to bring it in to a service center and pay some goon $344.95+tax to replace the screen.
fuck that, i said, so i proceeded to take the panel apart until i isolated the screen-- which i discovered to be an LG/Phillips screen, model number LM170E01(A5), and i can't find any replacement parts for less than a hundred bucks online. however, there is another brand called ECO that makes a screen with model number HT170E01(A5), and there is one on ebay right now for $25.
my question is: can i replace my crapped-out LM part with the HT part, or will it only work if it's an LM part? gut feeling says yes, so if i don't hear an overwhelming "NO, YOU HAVE TO USE THE LM PART!!!" from you guys, i'm gonna snap up the HT part before the auction ends in 5 days.
yeah, it's fuckin' goofy lookin'
problem is, the 17" LCD screen is all wonky. after troubleshooting as much as possible (drivers & whatnot) i have decided that it is simply the screen itself. some areas of the display tend to repeat to the right of where they are supposed to be, which looks terrible. i did a livechat with a gateway CS person, and she wouldn't tell me anything beyond how to separate the panel from the base. i said "but the problem is in the screen itself, can you tell me how to replace that? or at least a part number so i can do it myself?" and she said replacing a screen is too complicated and i should not attempt to do this myself. she tried to get me to bring it in to a service center and pay some goon $344.95+tax to replace the screen.
fuck that, i said, so i proceeded to take the panel apart until i isolated the screen-- which i discovered to be an LG/Phillips screen, model number LM170E01(A5), and i can't find any replacement parts for less than a hundred bucks online. however, there is another brand called ECO that makes a screen with model number HT170E01(A5), and there is one on ebay right now for $25.
my question is: can i replace my crapped-out LM part with the HT part, or will it only work if it's an LM part? gut feeling says yes, so if i don't hear an overwhelming "NO, YOU HAVE TO USE THE LM PART!!!" from you guys, i'm gonna snap up the HT part before the auction ends in 5 days.
compost the rich
Re: LCD screen
anyone? go with the exact replacement for $100 or a different brand for $25?
compost the rich
Re: LCD screen
i'd just go buy a new 22" screen for 225
- 10sun
- NT Drunkard

- Posts: 9861
- Joined: Sat Mar 13, 2004 10:22 am
- Location: Westwood, California
- Contact:
Re: LCD screen
brinstar wrote:anyone? go with the exact replacement for $100 or a different brand for $25?
Are you afraid to lose $25 for the possibility of saving $75?
- 10sun
- NT Drunkard

- Posts: 9861
- Joined: Sat Mar 13, 2004 10:22 am
- Location: Westwood, California
- Contact:
Re: LCD screen
Upon further review and investigation into the matter, personally I would buy the ECO version first as that seems to be the same part directly from the manufacturer.
- 10sun
- NT Drunkard

- Posts: 9861
- Joined: Sat Mar 13, 2004 10:22 am
- Location: Westwood, California
- Contact:
Re: LCD screen
Also, are you certain it is the LCD itself that is bad & not the video card?
- 10sun
- NT Drunkard

- Posts: 9861
- Joined: Sat Mar 13, 2004 10:22 am
- Location: Westwood, California
- Contact:
Re: LCD screen
http://www.erecycleronline.com/p-63-lg- ... 01-a5.aspx
edit: fuck, noticed not in stock.
Also: hook a monitor up through the rear connectors & not get the same problem?
edit: fuck, noticed not in stock.
Also: hook a monitor up through the rear connectors & not get the same problem?
Re: LCD screen
10sun wrote:http://www.erecycleronline.com/p-63-lg-philips-17-lcd-screen-panel-lm170e01-a5.aspx
edit: fuck, noticed not in stock.
Also: hook a monitor up through the rear connectors & not get the same problem?
the rear connector, i discovered, is not actually connected to anything. you need a separate cord to connect it to the motherboard. lame!
compost the rich
Re: LCD screen
what the fuck is that abomination, haha
jesus
shoot it with a shotgun and put it out of it's misery
jesus
shoot it with a shotgun and put it out of it's misery
Re: LCD screen
lol i know it's fucked-up looking
it has a P4 3.0GHz cpu, dvd-rom drive, 1.5GB ram, and a 40gb hard drive
only cost me $220 at a state surplus auction, figured it would make a good school comp
plus, if i end up not liking it, i can ebay it for more than that (once the screen is replaced)
it has a P4 3.0GHz cpu, dvd-rom drive, 1.5GB ram, and a 40gb hard drive
only cost me $220 at a state surplus auction, figured it would make a good school comp
plus, if i end up not liking it, i can ebay it for more than that (once the screen is replaced)
compost the rich
Re: LCD screen
fair enough
but wow
ugly~
but wow
ugly~


